by engineer | May 3, 2017 | Highway/Roadway Design
This project widens and resurfaces 5.4 miles of SH-63 starting at US-271 in Talihina, OK. The existing SH-63 is a 22ft wide rural collector with no paved shoulders. With the exception of realignment at the intersection with US-271, improvements include the following:...
by engineer | May 3, 2017 | Highway/Roadway Design
This project on SH-63 included the rehabilitation of two multi-span bridges as well as improving the horizontal and vertical alignments by adding shoulders, correcting deficiencies, and replacing four bridge-sized boxes. GUY provided traffic control design, using a...
by engineer | May 3, 2017 | Bridge Design
This project replaced a structurally deficient two 28-foot I-beam span bridge with a 180 ft three span bridge (PC Beam). The project also included approximately 3400 ft of approaches. The new structure provides a significant improvement in terms of area drainage, as...
by engineer | May 2, 2017 | Highway/Roadway Design
The Osage Nation improved this cut-through road between Wynona and Barnsdall. The total project includes ten miles of chip/seal recycling and overlay and drainage design including: RCP and RCB extensions New 3-75ft PC beam bridge New 3-14.5ft by 14.5ft RCB New 20ft by...
by engineer | May 2, 2017 | Highway/Roadway Design
This design was funded by the Cherokee Nation which included reconstructing Chimney Rock Road from the SH-82 junction extending two miles east to the Chimney Rock Reservoir Bridge. The roadway reconstruction project included the following tasks: Adding 4ft shoulders...
